MyRepublic Wi-Fi Hub: Setting it Up

Download the Wi-Fi Hub 2017 Quick Start Guide here

Getting connected: Internet

  • Plug one end of the powerpack into an electrical outlet, and the other end into the MyRepublic Wi-Fi hub.

  • Connect an Ethernet cable between the Red WAN port on the back of the MyRepublic Wi-Fi Hub to the port 1 on the ONT (Alcatel Lucent) installed by your technician. 

  • Once everything is connected, power on the MyRepublic Wi-Fi Hub using the black button on the back.

  • Your device will power on.


Getting connected: Devices

  • Connect any Ethernet devices to the yellow ports on the back of the MyRepublic Wi-Fi Hub

  • Connect any Wireless devices to the MyRepublic Wi-Fi Hub using the password provided on the Purple fridge magnet/ printed at the bottom of the router.
    • If you'd like to customise your Wi-Fi username or password, check out our guide here
    • Your device should now be up and running, if you have any issues simply reboot the device and wait for it to power on. If this does not resolve the problem, refer to our troubleshooting section for support.

Did this article answer your question?

If not, please contact our Customer Service Hotline at 6717 1680.
Residential Hotline 6717 1680
Business Hotline 6816 0088
Gamer Hotline 6815 1337
Sales Hotline 6816 0099
General/ Billing/ Gamer Hotline: Mon to Sun
9am to 9pm
Technical Hotline: Mon to Sun
Email Support -
Live chat: Mon to Fri
9am to 6pm (excl. public holidays)
11 Lorong 3 Toa Payoh
#04-11/15, Jackson Square Block B
Singapore 319579
Powered by Zendesk